中文繁体  | English

新闻动态   NEWS

Industry News   ALL NEWS

您当前所在的位置:首页 > 新闻动态 > Industry News

Attention to the problem

An engineering data processing: the customer files for CAM treatment, we must grasp the two aspects, one should seriously thorough understanding of the transmission line production accuracy requirements; second is based on the accuracy requirements and process capability combined with factory and make appropriate craft compensation.

2, cutting: Usually PCB cutting shears are used or automatic cutting machine, but for the microwave dielectric materials can not be generalized, according to the characteristics of different media, and the choice of different cutting methods, mostly milling, cut mainly to affect the flatness of the material and the quality of the board.

3, Drilling: For different dielectric materials, not only different drilling parameters, but also on the angle drill, hole processing methods are different, in order to avoid the burrs.

4, vias Ground: Under normal circumstances, the via hole using the electroless copper by grounding, electroless copper typically used chemical method or a plasma method for processing, from safety considerations, we used plasma method, the effect is very good; For the aluminum microwave dielectric materials, the use of the usual copper plating school, there is considerable difficulty, metallic conductive material generally recommended grounding through hole method is more suitable, but the hole resistance is generally less than 20m?. 5, the pattern transfer: This step is to ensure the accuracy of an important process graphics. In the choice of the photoresist, wet film, dry film and other photographic materials must meet the requirements of precision graphics; while lithography light source or exposure machine must also meet the needs of the process.

6, the etching: This step is necessary to strictly control the etching process parameters, such as: the content of each component of the etching solution, the temperature of the etching solution, the etching speed. Sure that the wires neat edges, no burrs, nicks, accuracy tolerances required range. To surly do this, we need fine effort, it is very necessary.

7, Tudu: high-frequency microwave plate conductors generally have the final coating of tin-lead alloy, tin-indium alloy, tin, strontium alloys, silver and gold. But gold plating is more common.

8, forming: forming and high-frequency microwave PCB board as to CNC milling based. But milling methods for different materials, there is a big difference. Milling the metal base of the microwave board requires a neutral liquid cooled, and the milling parameters is also considerable differences. In short, high-frequency microwave board production, in addition to pay attention to some of the above questions, you must also be careful HASL usually tin cylinder temperature, air pressure and the size of turnover, clip during indentation and scratches. Only a careful and detailed attention to every aspect in order to really make qualified products to.

         走进方达  |    新闻动态    |   产品中心   |    设备与技术   |   销售网络   |   联系我们 |   站点地图 |   网站地图

            COPYRIGHTS © 2010-2020 版权所有 深圳市方达电路有限公司 粤ICP备20043742号

友情链接: IC-深圳大盛唐电子有限公司 生意多商务 生意多贸易 超声波传感器 团队T恤定制 深圳小仓库 安卓播放机 文武学校 迷你仓 办公家具

本站关键词:铝基板 线路板 方达电路

?>